Browsing by Author "Badekai Ramachandra, B.R."

Now showing 1 - 20 of 96

A novel and ultrasensitive high-surface porous carbon-based electrochemical biosensor for early detection of dengue virus
(Elsevier Ltd, 2024) Hegde, S.S.; Naik, S.; Badekai Ramachandra, B.R.; Mishra, P.; Udayakumar, D.; Ahmed, M.U.; Santos, G.N.
Dengue fever, a mosquito-borne viral infection, poses a significant global health threat, and early diagnosis is crucial for effective disease management. The utilization of advanced materials in the design ensures an improved surface area, facilitating a heightened interaction between the sensor and the target. In this study, the incorporation of biomass-derived high-surface porous carbon-based materials not only contributed to the sensor's sensitivity but also ensured a cost-effective and scalable manufacturing process. The electrochemical nature of the biosensor added a layer of precision to the detection process and offered a reliable, rapid method for identifying the infection of the dengue virus. The enhanced sensitivity of the biosensor allowed the detection of even trace amounts of the NS1 protein, enabling early diagnosis in the initial stages of dengue infection. The system exhibited a high sensitivity with a wide linear range between 1 pg/mL and 100 μg/mL, and the extremely low detection limit of 0.665 pg/mL ranks this as one of the most efficient biosensors for the detection of dengue virus NS1 protein. Selectivity studies, coupled with computational insights, showcased the biosensor's prowess in distinguishing NS1 protein from potential interfering substances, laying the foundation for reliable diagnostics in complex biological matrices. Real sample analysis using human serum spiked with NS1 protein offers a tantalizing glimpse into the transformative potential of biosensors in real-world scenarios. This innovative biosensor holds great promise for addressing the pressing need for early detection of dengue virus infections. © 2024 The Authors
A study on the electro-reductive cycle of amino-functionalized graphene quantum dots immobilized on graphene oxide for amperometric determination of oxalic acid
(Springer-Verlag Wien michaela.bolli@springer.at, 2019) Mishra, P.; Badekai Ramachandra, B.R.
Amino-functionalized graphene quantum dots (NH2-GQD) are described for the amperometric determination of oxalic acid. The NH2-GQD were synthesized via a hydrothermal method using hexamethylenetetramine as the source for nitrogen. The average particle size of the GQD is ?30 nm, which is also supported by TEM. Electrochemical analysis of the NH2-GQD-GO composite on a glassy carbon electrode at pH 7.4 showed a faint reduction peak at ?0.6 V vs. SCE, which was enhanced in the presence of oxalic acid. This variation in cathodic current density is an interesting deviation from the usually studied anodic current density for the electrochemical sensors. This is also supported by cyclic voltammetry and time-based amperometric measurements. The electrode has a linear response in the 0.5–2.0 mM and 2.0–55 mM oxalate concentration ranges and a 50 ?M detection limit (at S/N = 3). The electrode was successfully applied to the determination of oxalate in spiked urine samples. [Figure not available: see fulltext.]. © 2019, Springer-Verlag GmbH Austria, part of Springer Nature.
Activated carbon derived from non-metallic printed circuit board waste for supercapacitor application
(Elsevier Ltd, 2016) Rajagopal, R.R.; Aravinda, L.S.; Rajarao, R.; Badekai Ramachandra, B.R.; Sahajwalla, V.
Activated carbons (ACs) have been synthesized by using waste PCBs via physical activation subsequent to pyrolysis processes. The physical and chemical properties of the produced activated carbons were studied using nitrogen adsorption, FT-IR spectroscopy, RAMAN spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy techniques. Among the synthesized ACs, AC with the highest surface area of 700 m2 g-1 produced at 850 °C for a time interval of 5 h was subjected to electrochemical studies. Capacitance behaviour of the obtained AC sample has been evaluated using cyclic voltammetry (CV), galvanostatic charge-discharge (GC-D) measurements and electrochemical impedance spectroscopy (EIS) technique. Specific capacitance (Cspec) values vary from 220, 185 and 156 F g-1 for corresponding scan rate of 30, 50 and 100 mV s-1 respectively. The well-developed surface area properties and good capacitance values associated with nitrogen functionalities indicates the AC developed is a good and suitable candidate for the supercapacitor fabrication. © 2016 Elsevier Ltd.
Aggregative ways of graphene quantum dots with nitrogen-rich edges for direct emission spectrophotometric estimation of glucose
(Elsevier B.V., 2019) Mishra, P.; Badekai Ramachandra, B.R.
We report a facile one step in-situ synthesis of amino-functionalized graphene dots. These quantum dots were employed for the detection of glucose in both standard aqueous solutions and commercially available fruit juice to assess its practicability. The characterization of the quantum dots revealed that they were decorated with amine functionality. Additionally, the interaction between glucose and amine functionalized graphene quantum dots gave enhancement in the UV–vis absorption and photoluminescence (PL) due to aggregation of quantum dots via glucose link. Therefore, the quantum dots were able to detect the concentration of glucose in solution exhibiting linearity from 0.1 to 10 mM and 50–500 mM with a sensitivity transition from 10 mM to 50 mM. The limit of detection for the determination of glucose was found to be 10 ?M. This determination was agreed from both UV–Vis absorption and PL spectroscopy. However, the PL emission method of determination was most suited with its very high accuracy of 98.04 ± 1.96% and 97.33 ± 2.67% for the linear range of glucose concentration within 0.1–10 mM and 50–500 mM, respectively. The PL enhancement was highly selective towards glucose in mixture of other form of sugars making it suitable for determining glucose in food samples. © 2019
Air-Stable Cobalt(II) and Nickel(II) Complexes with Schiff Base Ligand for Catalyzing Suzuki–Miyaura Cross-Coupling Reaction
(Pleiades journals, 2018) Ansari, R.M.; Kumar, L.M.; Badekai Ramachandra, B.R.
The Co(II) complex [Co{C6H4–1,2-(N=CH–C6H4O)2}] (I) and Ni(II) complex [Ni{C6H4–1,2-(N=CH–C6H4O)2}] (II) with Schiff base of o-phenylenediamine and salicylaldehyde have been synthesized. The structure of the ligand and its complexes were derived on the basis of various techniques such as elemental analysis, mass, FT-IR, electronic spectra and magnetic susceptibility. From the Singal crystal X-ray diffraction (SCXRD) analysis techniques (CIF file CCDC no. 1498772 (II)), it has been confirmed that the Schiff base ligand (L), coordinates to the metal ion in a tetradentate fashion through the nitrogen and oxygen atom. In addition, the square planar geometry of Ni(II) complex also has been confirmed from SCXRD. Electronic spectra, mass spectra, and magnetic susceptibility measurements reveal square planar geometry for the Co(II) complex. Synthesized complexes were used in cross-coupling of arylhalides with phenylboronic acid. The transformation offers products in good yields using 0.02 mmol catalysts loading, thereby proving the efficiency of the complexes as catalysts for Suzuki–Miyaura reaction. © 2018, Pleiades Publishing, Ltd.
All-optical switching and limiting properties of a Ru (II) Schiff-base complex for nonlinear optical applications
(Institute of Physics Publishing michael.roberts@iop.org, 2017) Manjunatha, K.B.; Rajarao, R.; Umesh, G.; Badekai Ramachandra, B.R.; Poornesh, P.
A salen-based ruthenium (Ru) (II) complex was synthesized for possible use in nonlinear optical device applications. The Ru complex was doped in a polymer matrix to fabricate films using a low-cost spin-coating technique. The third-order nonlinear optical parameters of the complex were investigated by Z-scan and degenerate four-wave mixing techniques. The study reveals two-order enhancement of third-order optical susceptibility ? (3) and exhibits superior limiting capability due to a reverse saturable absorption process. All-optical switching action for the films indicates that the sample can function as an optical inverter or a NOT gate. Hence, the Ru (II) Schiff-base complex materializes as a possible candidate for use in nonlinear optical devices. © 2017 Astro Ltd.
Benzene hydroxylation to phenol with iron impregnated activated carbon catalysts
(Elsevier Inc., 2006) Choi, J.-S.; Kim, T.-H.; Choo, K.-Y.; Sung, J.-S.; Saidutta, M.B.; Badekai Ramachandra, B.R.; Rhee, Y.-W.
Iron impregnated on activated carbon was used as catalyst for the direct synthesis of phenol from benzene. The effect of Sn addition to the catalyst was studied. The prepared catalysts were characterized by BET, SEM and XRD analysis. The catalyst 5.0Fe/AC showed good activity in the conversion of benzene and addition of Sn seemed to improve the selectivity of phenol in the reaction. Â© 2006 Elsevier B.V. All rights reserved.
Bi-functional LaMxFe1-xO3 (M = Cu, Co, Ni) for photo-fenton degradation of methylene blue and photoelectrochemical water splitting
(Elsevier Ltd, 2023) James, A.; Rodney, J.D.; Rao, L.; Badekai Ramachandra, B.R.; Udayashankar, N.K.
Due to growing concern over environmental remediation and the energy crisis, perovskite nanoparticles have gained wide interest in converting solar energy to sustainable fuel and also in degrading organic effluents. Herein, we report the synthesis and bi-functional activity of one-pot-glycine combustion derived LaMxFe1-xO3 (M = Cu, Co, Ni; x = 0, 0.01) for photo-Fenton degradation of Methylene Blue (MB) and photoelectrochemical water splitting. When used as a photocatalyst, with partial substitution of Cu even at a lower concentration, LaCu0.01Fe0.99O3 has exhibited excellent degradation efficiency of 96.4% in 90 min, which is 2.5 times better than the LaFeO3. On the other hand, Co and Ni modified LaFeO3 photocatalysts have demonstrated prominent activities with degradation efficiency of 93.8% and 74.8% respectively within 180 min of visible light irradiation. The retention and reusability analysis showed that LaCu0.01Fe0.99O3 is stable against photo corrosion and remains unchanged after 5 consecutive cycles of MB dye degradation. In addition, LaCu0.01Fe0.99O3 is complimented as a single catalyst for dual functions such as photocatalysis and electrocatalysis, both of which are assisted by visible light. Under illumination, the overpotential (η) improved from 507.6 mV vs RHE (dark) to 498.1 mV vs RHE (light) for O2 evolution and 220.5 mV vs RHE (dark) to 182.8 mV vs RHE (light) for H2 generation respectively. The light response of the catalyst and improvement in activity is validated by the significant enhancement in current density under exposure at both half cycle of chronoamperometry. © 2023 Hydrogen Energy Publications LLC
Biomass waste-derived porous graphitic carbon for high-performance supercapacitors
(Elsevier Ltd, 2024) Hegde, S.S.; Badekai Ramachandra, B.R.
Porous carbons possess considerable appeal and are in high demand as materials that can be produced from biomass waste. This study presents the transformation of Tectona grandis (Teak) sawdust into porous carbon materials, referred to as Tectona grandis sawdust-derived porous carbon (TPC), through a cost-effective FeCl3-assisted carbonization process, followed by a KOH activation. TPC samples were synthesized by carbonization at different temperatures (650–850 °C) and characterized comprehensively. Structural analysis via X-Ray diffraction (XRD), Raman, and Fourier Transform Infrared Spectroscopy (FTIR) revealed a progressive enhancement in graphitic structure and reduction of functional groups with increasing activation temperature. Field emission scanning electron microscopy (FESEM) displayed the development of intricate hollow tube-like porous networks in TPC-850, with the highest specific surface area (1767.66 m2/g) and pore volume (1.43 cm3/g). Electrochemical investigations showcased the superior performance of TPC-850 as a supercapacitor electrode due to its high graphitic nature, large surface area, and well-structured porosity. The galvanostatic charge-discharge (GCD) measurements exhibited a high specific capacitance of 572 F/g at 0.5 A/g in a 6 M KOH electrolyte. The high-frequency semicircle and low-frequency steeper region in electrochemical impedance spectroscopy (EIS) further indicated reduced resistance and enhanced ion diffusion in TPC-850. Significantly, TPC-850 demonstrated remarkable electrochemical cyclic stability, retaining 95.83 % of its initial capacity even after undergoing 4500 cycles at a scan rate of 500 mV/s. The findings underscore the viability of TPC-850 as a high-performance supercapacitor electrode material, providing insights into harnessing renewable resources for advanced energy solutions. This work highlights the potential of utilizing waste biomass for energy storage applications and demonstrates the feasibility of converting it into efficient porous carbon materials with substantial graphitization and porosity. © 2023 Elsevier Ltd
Bulk scale production of carbon nanofibers in an economical way
(2012) Rajarao, R.; Badekai Ramachandra, B.R.
An economical route for the scalable production of carbon nanofibers (CNFs) on a sodium chloride support has been developed. CNFs have been synthesized by chemical vapor deposition (CVD) method by using metal formate as catalyst precursors at 680°C. Products were characterized by SEM, TEM, Raman spectroscopy and XRD method. By thermal analysis, the purity of the as grown products and purified products were determined. This method avoids calcination and reduction process which was employed in commercial catalysts such as metal oxide or nitrate. The problems such as detrimental effect, environmental and even cost have been overcome by using sodium chloride as support. The yield of CNFs up to 7800 wt.% relative to the nickel catalyst has been achieved in the growth time of 15 min. The advantage of this synthesis technique is the simplicity and use of easily available low cost precursors. © 2012 Higher Education Press and Springer-Verlag Berlin Heidelberg.
Calcium-Induced Photoluminescence Quenching of Graphene Quantum Dots in Hard Water: A Quick Turn-Off Sensing Approach
(Wiley-Blackwell, 2019) Mishra, P.; Badekai Ramachandra, B.R.
The photoluminescence of graphene quantum dots (GQD) is widely explored for sensory applications. Among various metal ions to be detected in aqueous bodies, Ca2+ ions are often neglected which is evident from the lack of literature. However, owing to booming industrialization, the available potable water is mostly crossing the prescribed hardness limits. Presented report summarize the synthesis of GQD via modified hydrothermal cutting of graphene oxide, which was further employed for sensing Ca2+ ions in hard water samples. The as synthesized GQD exhibited its characteristic blue photoluminescence on excitation with longwave UV (? ? 365 nm) which was suppressed on the introduction of Ca2+ ions. The GQD as photoluminescent probe determined the concentration of Ca2+ ion in water with an accuracy of 96.74% ± 3.26%. The LOD of the reported method was found to be 5 ?M and it was sensitive towards Ca2+ ions in the presence of interfering ions such as Al3+, Mg2+, and K+ which are commonly found in hard water samples. Therefore, the determination of hardness of water w.r.t Ca2+ using GQD based PL turn off sensing is a quick, viable and economical method. © 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
Cerium-Modulated Zinc Oxide for enhanced Photoelectrochemical Non-Enzymatic biosensing of Cholesterol: An experimental and First Principle Analysis
(Elsevier B.V., 2024) Rao, L.; Rodney, J.D.; Joy, A.; Shivangi Nileshbhai, C.; James, A.; S, S.; Joyline Mascarenhas, F.; Udayashankar, N.K.; Anjukandi, P.; Chul Kim, B.; Badekai Ramachandra, B.R.
Herein, we synthesized CexZn1-xO (x = 0.00, 0.01, 0.02, and 0.03) using the wet chemical method. The investigation explores photoelectrochemical (PEC) biosensors for enzyme-free detection of cholesterol, employing Ce0.03Zn0.97O (CZO3)/Nickel Foam (NF) as the active material. The investigation revealed notable enhancements in sensitivity for cholesterol detection, with a recorded activity of 2.812 mA.mM?1.cm?2, marking a twofold increase in comparison to dark mode (1.37 mA.mM?1.cm?2). The Limit of Detection (LOD) was determined to be 17 µM (light) and 28 µM (dark), while the Limit of Quantification (LOQ) was measured at 54 µM (light) and 98 µM (dark) in 0.1 M KOH solution. These findings demonstrate a linear detection range spanning from 80 µM to 2 mM. Ab-initio calculations based on Density Functional Theory (DFT) were carried out on 101 surfaces of both pristine ZnO and CZO3 to understand how the doping affected the pristine ZnO band gap. The findings indicate that CZO3 exhibits superior activity compared to pristine ZnO, underscoring its enhanced performance and potential for sensing application. The CZO3/NF photoelectrochemical (PEC) biosensor displayed notable cyclic stability, retaining 97 % of its performance over a 60-day period. This underscores its potential for reliable and enduring operation in biosensing applications. Additionally, CZO3/NF exhibited robust sensing capabilities when utilized with human serum samples, showcasing consistent performance in both dark and illuminated conditions. © 2024 Elsevier B.V.
Cobalt complex in a room temperature ionic liquid: A convenient recyclable reagent for catalytic epoxidation of cyclic alkenes
(Elsevier Masson SAS infos@masson.fr 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2014) Ramakrishna, D.; Badekai Ramachandra, B.R.; Hanumanthappa, S.K.T.
Co-catalyzed epoxidation of cyclic alkenes proceeds in ionic liquid media (1-ethyl-3-methylimidazolium hexafluorophosphate). Epoxidation of the alkenes to respective epoxides was greatly accelerated by the use of a cobalt-based catalyst in the presence of H2O2 as an oxidant. The catalyst in ionic liquid [Emim]PF6 was recycled and reused for about seven times. © 2014 Académie des sciences. Published by Elsevier Masson SAS. All rights reserved.
Cobalt Schiff Base Immobilized on a Graphene Nanosheet with N, O Linkage for Cross-Coupling Reaction
(American Chemical Society, 2019) Saroja, A.; Badekai Ramachandra, B.R.
A simple and direct pathway to synthesize heterogeneous catalyst by covalently immobilizing a cobalt Schiff base complex on the surface of amino functionalized graphene oxide for the cross coupling of aryl halides and arylboronic acids is reported. The as synthesized samples were characterized using various spectroscopic techniques and thermal analysis to attain their structural and functional features. The analysis confirmed that the Co bounded to the ligand using bi(N, O) linkage and the Co Schiff base complex immobilized onto the functionalized graphene oxide through its amino moiety. The catalytic investigation confirmed the product yield up to 96.5% for the Suzuki cross coupling using gas chromatography. ICP analysis shows that the central active metal is 85% in its catalyst even after the fifth iteration. High product yield, environmentally benign, easy workup, easy filtration of catalyst, and mild reaction conditions are the main facets of this catalyst. © Copyright 2018 American Chemical Society.
Cobalt-doped LaFeO3 for photo-Fenton degradation of organic pollutants and visible-light-assisted water splitting
(Springer, 2024) James, A.; Rodney, J.D.; Manojbabu, A.; Joshi, S.; Rao, L.; Badekai Ramachandra, B.R.; Udayashankar, N.K.
The increasing demand for clean energy sources and the growing concerns about environmental pollution have led to a significant interest in developing efficient photocatalytic and photoelectrochemical systems. Here, we report the visible-light-induced photo-Fenton catalytic degradation of Methylene Blue (MB) dye over LaFeO3 and LaCo xFe1−xO3 (x = 0.01, 0.05, 0.1) catalysts synthesized via the facile combustion method. The LaCo0.01Fe0.99O3 has significantly enhanced the photo-Fenton catalytic efficiency of LaFeO3 from 67.75 to 93.85% for MB dye removal after 180 min of light irradiation. The rate constants calculated via the pseudo-first-order kinetics mechanism are found to be 0.00532/min for LaFeO3 and 0.01476/min for LaCo0.01Fe0.99O3, respectively. In addition, the most effective LaCo0.01Fe0.99O3 catalyst has demonstrated remarkable degradation performance towards Tetracycline (TC) and Methyl Orange (MO) dye with an efficacy of 93.81% and 69.67%, respectively, indicating its versatility. Further, the pristine and doped LaFeO3 were structurally optimized using DFT, and the computed band gaps were following the experimental data. Interestingly, the same catalyst can be employed as a light-induced electrocatalyst in addition to water treatment by taking advantage of its dual functionality. The LaCo0.01Fe0.99O3 catalyst achieved a benchmark current density of 10 mA/cm2 for H2 evolution at an overpotential of 297 mV vs. RHE which further improved to 190 mV vs. RHE under illumination. This work provides valuable insights on partial Co incorporation at the B-site of LaFeO3 for the development of visible-light-induced photocatalytic and electrocatalytic systems, which is hoped to contribute to the advancement of sustainable energy production and environmental remediation. © 2024, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.
Copper (II) Schiff base-graphene oxide composite as an efficient catalyst for Suzuki-Miyaura reaction
(Elsevier B.V., 2019) Ansari, R.M.; Badekai Ramachandra, B.R.
Transition metal copper (II) Schiff base composite (Cu–NH2–GO) was synthesized using functionalized graphene oxide with (3-aminopropyl) methoxysilane (APTMS). X-ray diffraction, FTIR spectroscopy and thermogravimetric analyses ascertained the incorporation of the copper (II) Schiff base on the functionalized graphene oxide. Scanning electron microscopy and TEM evidences further confirmed the surface morphology of the composite. Catalytic activity study indicated that the synthesized Cu–NH2–GO was active for cross-coupling of aryl halide with phenylboronic acid. Above 84% (4-Iodobenzonitrile) biphenyl conversion could be achieved using Cu–NH2–GO catalyst in the C–C coupling reaction. © 2018 Elsevier B.V.
Copper complex with N-,O- architecture grafted graphene oxide nanosheet as a heterogeneous catalyst for Suzuki cross coupling reaction
(Taiwan Institute of Chemical Engineers, 2019) Anuma, S.; Mishra, P.; Badekai Ramachandra, B.R.
We report a straight forward synthesis of a heterogeneous catalyst by covalently immobilizing copper Schiff base complex on the surface of amino functionalized graphene oxide (AGO) for the Suzuki coupling of substituted aryl halides with arylboronic acids. The as-synthesized complex and subsequent catalyst were characterized for their structural features using suitable techniques. The analysis confirmed that the Cu bound to Schiff base (L) ligand via bi(N-,O-) linkage and Cu-L immobilization on AGO was due to its amino functionality. The catalyst exhibited excellent yield of 94% for Suzuki coupling reactions as analyzed by gas chromatography. The catalyst was recycled for 5 successive reactions with insignificant loss in efficiency. ICP-AES analysis showed the catalyst retained 87.5% of its active metal center after 5th iteration. High yield, environmentally benign, easy work-up procedure, easy separation of catalyst and mild reaction conditions are some of the important facets this catalyst offer. © 2018 Taiwan Institute of Chemical Engineers
Customizable ceramic nanocomposites using carbon nanotubes
(MDPI AG indexing@mdpi.com Postfach Basel CH-4005, 2019) Okolo, C.; Rafique, R.; Sagar, S.S.; Subhani, T.; Saharudin, M.S.; Badekai Ramachandra, B.R.; Inam, F.
A novel tweakable nanocomposite was prepared by spark plasma sintering followed by systematic oxidation of carbon nanotube (CNT) molecules to produce alumina/carbon nanotube nanocomposites with surface porosities. The mechanical properties (flexural strength and fracture toughness), surface area, and electrical conductivities were characterized and compared. The nanocomposites were extensively analyzed by field emission scanning electron microscopy (FE-SEM) for 2D qualitative surface morphological analysis. Adding CNTs in ceramic matrices and then systematically oxidizing them, without substantial reduction in densification, induces significant capability to achieve desirable/application oriented balance between mechanical, electrical, and catalytic properties of these ceramic nanocomposites. This novel strategy, upon further development, opens new level of opportunities for real-world/industrial applications of these relatively novel engineering materials. © 2019 by the authors
Cyanopyridone-cored fluorophores with triphenylamine peripheries: From molecular design to OLED fabrication studies
(Elsevier B.V., 2023) Vishrutha, K.S.; Ulla, H.; Raveendra Kiran, M.; Badekai Ramachandra, B.R.; Vasudeva Adhikari, A.
Amongst many types of fluorescent organic materials, compounds with π-conjugation between an electron donor (D) and electron acceptor (A) have been intensively investigated as effective organic electroluminescence (EL) device components. Herein, we report the synthesis and structural characterization of a new series of D-A-D configured small molecule-based fluorophores (TPA-CyP1-7) having triphenylamine (TPA) as a donor unit and 3-cyanopyridine-2-one (CyP) as an acceptor core with different architects for use as efficient yellow light emitters in fluorescent organic light-emitting diodes (OLED). The detailed photophysical, solvatochromic, thermal, electrochemical, and EL properties, including quantum chemical calculations, were systematically investigated to study their relation between structure and properties. All the fluorophores show high fluorescent quantum yields in the solid film state and display high thermal stability with decomposition temperatures above 350 °C. The study reveals that they possess appropriate HOMO and LUMO energies level for effective charge injection. Finally, these yellow luminogens were employed to fabricate new OLED devices as sole emitters and dopants with CBP host materials. Interestingly, the host–guest devices doped with CBP host emitters show a remarkable improvement in the overall device performance. Among them, the TPA-CyP3-based doped device has achieved a maximum current efficiency (ηc), high power efficiency (ηp), and good external quantum efficiency (ηEQE) of 10.72 cd/A, 7.87 lm/W, and 5.32 %, respectively. © 2022 Elsevier B.V.
Dengue detection: Advances and challenges in diagnostic technology
(Elsevier Ltd, 2022) Hegde, S.S.; Badekai Ramachandra, B.R.
Virus-borne infectious illnesses may quickly escalate into unpleasant pandemics, wreaking havoc on the global populace and disrupting daily life. As a result, these factors influence the global economy, resulting in joblessness, physical, psychological, emotional stress, and posing a threat to human life. Dengue disease is known as one of the most dangerous illnesses for humans. A DENV infection may have no symptoms or symptoms that are similar to those of other viral infections. As a result, early detection of this virus infection is more important to track disease spread and protect society from its harmful effects. This article provides an overview of dengue disease, the working principles, the significance of the various conventional and biosensor detection strategies, the benefits and problematic conditions of the reported methods. The present hurdles of transferring laboratory research into real-world technological implementations and the future possibilities for detecting devices for viral diagnosis are highlighted in this study. © 2021 The Author(s)