Please use this identifier to cite or link to this item: https://idr.nitk.ac.in/jspui/handle/123456789/15677
Title: Active feedback supported CMOS LNA blended with coplanar waveguide-fed antenna for Wi-Fi networks
Authors: Roy, A.
Gunjan Mittal; Dwari
Santanu; Kanaujia
Binod Kumar; Kumar
Sandeep; Song
Hanjung
Citation: IET MICROWAVES ANTENNAS & PROPAGATION , Vol. , , p. -
Abstract: This study presents integration of complementary CMOS active feedback low noise amplifier with coplanar waveguide fed patch antenna for Wi-Fi networks. The LNA design-I, involves a cascode amplifier followed by active feedback common source amplifier offering wideband impedance matching with lowered parasitic losses. The inductor-less feedback mechanism is used to nullify noise effect with extended bandwidth in the range of 2.2 to 5.8 GHz and a peak forward gain of 22.5 dB. It is implemented on agilent's advance design system using 45 nm CMOS process. The noise figure (NF) is approximately 2 dB while the stability factors mu and mu prime are well above 1 dB with IIP3 of about 15 dBm. The chip area is 0.57 x 0.57 mm(2) under dc power supply of 1V while power consumption of 0.8 mW. A CPW fed antenna design-II, achieves a wide band response similar to the bandwidth of LNA. The size of the fabricated antenna is calculated as 40 x 40 mm(2). The peak gain is approximately 4.1 dBi at 3.9 GHz. The codesign-III, proposes a receiver achieving a much wider band of 1.6 to 6 GHz with a gain of 16.5 dB and NF of 2.59 dB at 2.06 GHz. The codesign improves the system integration by reducing overall chip area and offers saving in the effective cost.
URI: https://doi.org/10.1049/mia2.12062
http://idr.nitk.ac.in/jspui/handle/123456789/15677
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.